Bixpy Electric Outboard Motors

A Bixpy adapter to mount a K-1/J-2 motor directly to 2019+ Hobie Outbacks.

• Built in hinge that allows you to lift the motor completly out of the water.
• Easy to get on and off the water through a quick release system.
• Adjustable motor height - 8" to 13" from bottom of plate to bottom of motor (it is recommended that the bottom of your motor be about 3" to 5" below the waterline and more in choppy water as necessary)
• 270° of rotational trim - adapter ships with set screws in place. To achieve steering, set screws must be removed.

This adapter allows you to easily mount a Bixpy K-1/J-2 motor to the stern of your Hobie Compass.

• Built in hinge that allows you to lift the motor completly out of the water.
• Easy to get on and off the water through a quick release system.
• Adjustable motor height - 8" to 13" from bottom of plate to bottom of motor (it is recommended that the bottom of your motor be about 3" to 5" below the waterline and more in choppy water as necessary)
• 270° of rotational trim - adapter ships with set screws in place. To achieve steering, set screws must be removed.

A Bixy adapter that lets your mount a K-1/J-2 motor to your Hobie Pro Angler 12 and 14.

• Built in hinge that allows you to lift the motor completly out of the water.
• Easy to get on and off the water through a quick release system.
• Adjustable motor height - 8" to 13" from bottom of plate to bottom of motor (it is recommended that the bottom of your motor be about 3" to 5" below the waterline and more in choppy water as necessary)
• 270° of rotational trim - adapter ships with set screws in place. To achieve steering, set screws must be removed.

A plug and play adaper to fit to any Hobie twist and stow rudder system.

• Based on a plug and play system, this will fit any Hobie with a Twist and Stow rudder!
• Uses the pre-existing Hobie steering system
• Fits Hobie models such as the, Sport, Revolution (11, 13 and 16), pre-2019 Outback, Outfitter and the Oasis

Bixpy K-1/J-2 motor adaper to fit many pedal drive units such as Hobie Mirage Drive, Vibe X-Drive and Pelican HD.

• Plug and play system for many Hull based Pedal drive systems - Please get in contact if you are unsure whether your boat is compatible
• Now fits more kayaks including all roto-molded Hobie® kayaks, Inflatable Hobie® kayaks, Vibe Kayaks with X-Drive and Pelican Kayaks with HD Drive
• This adapter does not fit the new Hobie® MirageDrive 360 or Hobie® Lynx
• Inherent floating design

A low profile Bixpy K-1 motor adaper to fit many pedal drive units including: Hobie Mirage Drive, Vibe X-Drive and Pelican HD Drives.

• Plug and play system for many Hull based Pedal drive systems - Please get in contact if you are unsure whether your boat is compatible
• Now fits more kayaks including all roto-molded Hobie® kayaks, Vibe Kayaks with X-Drive and Pelican Kayaks with HD Drive
• This adapter does not fit the Hobie® MirageDrive 360, Hobie® Lynx, or Hobie inflatable kayaks
• The design includes a front bumper which protects the motor in case of impact

A K-1 motor adapter that drops directly into the hull of any FeelFree kayak with a Sonar Pod.

• Sealed design to keep the inside of the Sonar Pod dry
• Less than 2kgs in weight!
• Comes with an original FeelFree Sonar Pod
• Features a motor shield to protect your motor

Retrofit your FeelFree Sonar Pod to accomadate a Bixpy J-2 Motor and maximise your paddling experience!

• Perfect for adapting your pre-existing sonar pod
• Can be used for other through-hull pod systems
• Designed to seal and keep the inside of your Sonar Pod dry
• Features a motor shield to protect your motor

Easily mount your K-1/J-2 Bixpy motor to basically any flat surface!

• Fittings not supplied
• Outer Dimension: 127mm x 30mm
• 4 x 6mm fitting holes

Adapt nearly any kayak to fit a Bixpy K-1/J-2 motor kit with the Bixpy Universal Kayak adapter

• Can be fitted to most kayaks and and small watercraft
• Recommended if your boat is not compatible with any other Bixpy Adapter
• Comes with all needed hardware.

Bixpy K-1/J-2 motor adapter designed to fit any standard 10mm rudder pin hole on the stern of your boat

• Gravity deployment system with a Gravity "Lock-down" mechanism for reverse
• Kick up feature for shallow water
• Removable cap to mount Bixpy Jet Motor
• 90° quick Slide & Stow feature

A DIY K-1/J-2 motor mount for any flat inflatable surface.

• Includes Inflatable Fin Box
• All hardware required (including adhesive)

A K-1/J-2 motor adapter for US style fin boxes.

• Includes all stainless steel hardware required to attach the fin to your fin box

A Bixpy K-1/J-2 Motor adapter for flip and lock style SUP fin boxes

• Includes all you need to mount a K-1/J-2 motor to your flip and lock fin box

A Bixpy J-2 Motor adapter for slide and lock style fin boxes

• Includes all you need to mount a J-2 motor to your slide and lock fin box

A DIY J-2 motor mount to fit almoast all transom plates.

• Adjustable depth and trim
• Includes: Transom WillFit™ Adapter, all necessary hardware, tiller steering handle and grip

A universal Tiller to fit any Bixpy WillFit™ adapter with a vertical down pipe

• Includes: Bixpy steering wing adaper, Tiller handle and Tiller grip

Designed to be used with any of the Bixpy WillFit™ Adapters that feature a 1" vertical pipe

• Includes: Bixpy pole steering adapter, Bixpy swivel adapter
• Pole not included

A hand steering system that is designed to be universally mounted in conjunction with the Bixpy Universal Kayak Adapter

• Includes: Steering Joystick, 500lb Braided Kevlar Steering line, tubing to run the line through your boat and necessary hardware for installation

A footrest controlled steering system for your Bixpy motor.

• Designed to fit most Bixpy motor adpaters
• Includes: a pair of adjustable footrests, 500lb Braided Kevlar Steering line, tubing to run the line through your boat and necessary hardware for installation